On this page
HR exam calculation questions are short, and the trap is almost never the arithmetic. It is the denominator: average headcount or ending headcount, all separations or only quits, hires or applicants. Get the denominator right and the answer follows.
This article gives 10 worked problems with every step shown. The formulas themselves are summarised in the HR metrics formulas notes, and the SHRM-CP exam prep and PHR exam prep courses include full question banks with metrics items.
Where do HR metrics appear on the exams?
| Exam | Where metrics appear | Examples the outline gives |
|---|---|---|
| aPHR | Talent Acquisition (19%), knowledge item 05 | Return on investment (ROI), cost-per-hire, time-to-fill |
| PHR | Business Management (14%), task 1.4 | Attrition rates, diversity in hiring, time-to-hire, time-to-fill, ROI, success of training |
| SPHR | Leadership and Strategy, task 1.8 | Turnover rates, cost per hire, employment statistics, ROI, pay equity analysis |
| SHRM-CP and SHRM-SCP | Analytical Aptitude, a behavioral competency in the Business cluster | Sub-competencies: Data Advocate, Data Gathering, Data Analysis, Evidence-Based Decision-Making |
Which formulas should you know?
| Metric | Formula | Watch for |
|---|---|---|
| Separations (turnover) rate | Separations / employment x 100 | Which headcount: average, start or end of period |
| Voluntary turnover (quits) rate | Quits / employment x 100 | Retirements are not quits in BLS data |
| Range midpoint | (Range minimum + range maximum) / 2 | Some employers use a market reference point instead |
| Compa-ratio | Pay / range midpoint | Shown as a decimal (1.045) or a percent (104.5%) |
| Position in range (range penetration) | (Pay - minimum) / (maximum - minimum) | Measures place in the range, not distance from midpoint |
| Cost per hire | (Internal costs + external costs) / total hires | Count hires, not applicants |
| Yield ratio | Candidates who reach the next stage / candidates at the previous stage | Ratios multiply across stages |
| Training ROI | (Benefits - costs) / costs x 100 | 0% is break-even, not a loss |
Conventions differ between organizations. If a question gives you the convention, use it. If it does not, use the standard formula above and look for the option that matches it.
Practice problems: turnover
These are original PrepSolution practice questions, not SHRM or HRCI exam items. Every figure was computed, and the arithmetic is shown.
Question 1: A monthly separations rate
A distribution center had 600 employees on payroll in March, and 18 employees separated during the month. Using the BLS method, what is the separations rate for March?
- A. 1.8%
- B. 3.0%
- C. 3.3%
- D. 33.3%
Best answer: B. BLS computes the separations rate by dividing separations by employment and multiplying by 100: 18 / 600 x 100 = 3.0%.
- A is weaker. 1.8% divides by 1,000, not by the 600 employees on payroll.
- C is weaker. 3.3% is the national total separations rate BLS reported for September 2026, not this employer's rate.
- D is weaker. 33.3% divides the headcount by separations (600 / 18) and misplaces the decimal. The ratio is upside down.
Question 2: Annual turnover with average headcount
A company started the year with 560 employees and ended it with 640. During the year, 54 employees separated. Using average headcount, what was annual turnover?
- A. 8.4%
- B. 9.0%
- C. 9.6%
- D. 10.8%
Best answer: B. Average headcount = (560 + 640) / 2 = 600. Turnover = 54 / 600 x 100 = 9.0%.
- A is weaker. 8.4% divides by the ending headcount of 640. Growth during the year makes that understate turnover.
- C is weaker. 9.6% divides by the starting headcount of 560.
- D is weaker. 10.8% does not come from any headcount in the question.
Question 3: Voluntary turnover
In the same company, 30 of the 54 separations were resignations and 24 were layoffs and dismissals. What was the voluntary turnover rate?
- A. 4.0%
- B. 5.0%
- C. 9.0%
- D. 55.6%
Best answer: B. Voluntary turnover uses quits only: 30 / 600 x 100 = 5.0%. The other 24 separations are involuntary.
- A is weaker. 4.0% is the involuntary rate (24 / 600).
- C is weaker. 9.0% is total turnover, both voluntary and involuntary.
- D is weaker. 55.6% is the share of separations that were voluntary (30 / 54). That is a useful figure, but it is not a turnover rate.
Question 4: Classifying a retirement
An employee retires. In the Bureau of Labor Statistics JOLTS data, how is this separation classified?
- A. Quit
- B. Layoff or discharge
- C. Other separation
- D. Not counted as a separation
Best answer: C. BLS defines quits as employees who left voluntarily, with the exception of retirements and transfers to other locations. Retirements are reported with other separations, along with transfers to other locations, deaths and separations due to employee disability.
- A is weaker. Retirement is voluntary, but BLS lists it as an exception to quits.
- B is weaker. Layoffs and discharges are involuntary separations initiated by the employer.
- D is weaker. A retirement is a separation from the payroll and is counted, under other separations.
Question 5: Annualizing a monthly rate
A manager reports that monthly turnover has held steady at 1.5%. Using the simple method of multiplying a stable monthly rate by 12, what is the annualized rate?
- A. 1.5%
- B. 12.0%
- C. 15.0%
- D. 18.0%
Best answer: D. 1.5% x 12 = 18.0%. The simple method assumes the monthly rate holds all year. If the question gives actual monthly separations, add them and divide by average headcount for the year instead.
- A is weaker. 1.5% is the monthly rate, not annualized.
- B is weaker. 12.0% would be a 1% monthly rate times 12.
- C is weaker. 15.0% multiplies by 10, not 12.
Practice problems: pay
Question 6: Compa-ratio
An analyst earns $62,700. The salary range for the grade is $48,000 minimum to $72,000 maximum. What is the compa-ratio?
- A. 0.87
- B. 1.00
- C. 1.045
- D. 1.31
Best answer: C. Midpoint = (48,000 + 72,000) / 2 = 60,000. Compa-ratio = 62,700 / 60,000 = 1.045, or 104.5%. The analyst is paid 4.5% above the midpoint.
- A is weaker. 0.87 divides by the range maximum (62,700 / 72,000).
- B is weaker. 1.00 would mean pay exactly at the midpoint of $60,000.
- D is weaker. 1.31 divides by the range minimum (62,700 / 48,000).
Question 7: Position in range
For the same analyst ($62,700 in a $48,000 to $72,000 range), what is position in range?
- A. 30.6%
- B. 50.0%
- C. 61.25%
- D. 104.5%
Best answer: C. Position in range = (pay - minimum) / (maximum - minimum) = (62,700 - 48,000) / (72,000 - 48,000) = 14,700 / 24,000 = 61.25%.
- A is weaker. 30.6% divides the amount above the minimum by the minimum itself (14,700 / 48,000).
- B is weaker. 50% would be pay exactly at the midpoint.
- D is weaker. 104.5% is the compa-ratio. The two measures answer different questions.
The University of Wisconsin-Madison, whose guidelines define both measures, aims to keep eligible salaries within 85% to 115% compa-ratio, or 25% to 75% position in range. That is one employer's policy, not a standard, but it shows how the two measures are used together.
Practice problems: recruiting and training
Question 8: Cost per hire
Last year a recruiting team spent $84,000 on internal costs (recruiter time allocated to hiring, applicant tracking system fees) and $66,000 on external costs (job board ads, agency fees, background checks). It made 40 hires from 300 applicants. What was cost per hire?
- A. $500
- B. $1,650
- C. $2,100
- D. $3,750
Best answer: D. Cost per hire = (internal + external) / hires = (84,000 + 66,000) / 40 = 150,000 / 40 = $3,750.
- A is weaker. $500 divides by applicants (150,000 / 300), not hires.
- B is weaker. $1,650 counts only external costs (66,000 / 40). Internal costs are part of the cost of hiring.
- C is weaker. $2,100 counts only internal costs (84,000 / 40).
Question 9: Yield ratios
Of 300 applicants, 90 passed screening, 30 were interviewed, 10 received offers and 8 accepted. What is the offer acceptance rate, and what share of applicants were hired?
- A. 80% and 2.7%
- B. 33% and 8%
- C. 80% and 8%
- D. 30% and 2.7%
Best answer: A. Offer acceptance = 8 / 10 = 80%. Applicants hired = 8 / 300 = 2.67%, about 2.7%. The second figure shows why yield ratios multiply: each stage loses candidates, so the overall rate is far lower than any single stage.
- B is weaker. 33% is the interview-to-offer ratio (10 / 30), and 8% is not a ratio from these figures.
- C is weaker. 80% is right, but 8% treats the 8 hires as a percentage without dividing by the 300 applicants.
- D is weaker. 30% is the screening pass rate (90 / 300), not offer acceptance.
Question 10: Training ROI
A sales training program cost $40,000. The organization measures $100,000 in added gross profit that it attributes to the program. What is the ROI?
- A. 60%
- B. 150%
- C. 250%
- D. 2.5%
Best answer: B. ROI = (benefits - costs) / costs x 100 = (100,000 - 40,000) / 40,000 x 100 = 60,000 / 40,000 x 100 = 150%.
- A is weaker. 60% confuses the $60,000 net benefit with a percentage.
- C is weaker. 250% is benefits divided by costs (100,000 / 40,000) as a percentage. That is a benefit-cost ratio of 2.5, not ROI.
- D is weaker. 2.5% misplaces the decimal in the benefit-cost ratio.
How should you study HR metrics?
- Learn each formula with its denominator. Most wrong options on metrics questions use the right numerator over the wrong denominator.
- Do a sense check before you choose. A turnover rate above 100% or a compa-ratio of 3.0 is almost always a misplaced decimal.
- Know what each metric is for. Compa-ratio compares pay to the midpoint; position in range shows where pay sits between minimum and maximum; cost per hire measures recruiting efficiency, not the quality of the people hired.
- For SPHR and SHRM-SCP, expect the question after the number: what would you recommend, given a rising quits rate or a group paid well below midpoint?
For a study order across the HRCI functional areas, see the PHR study guide and the SPHR study guide.
References
- [1] U.S. Bureau of Labor Statistics (2026). Job Openings and Labor Turnover Survey: Technical Note. BLS. BLS
- [2] U.S. Bureau of Labor Statistics (2026). JOLTS Data Definitions. BLS. BLS
- [3] U.S. Bureau of Labor Statistics (2026). Job Openings and Labor Turnover Summary, September 2026. BLS. BLS
- [4] University of Wisconsin-Madison Office of Human Resources (2023). Salary Administration Guidelines. UW-Madison. UW-Madison
- [5] Boston College (2026). Salary Compa-Ratio. Boston College Office of the Controller. Boston College Office of the Controller
- [6] HR Certification Institute (2024). PHR Exam Content Outline. HRCI. HRCI
- [7] HR Certification Institute (2024). SPHR Exam Content Outline. HRCI. HRCI
- [8] HR Certification Institute (2024). aPHR Exam Content Outline. HRCI. HRCI
- [9] SHRM (2026). SHRM Body of Applied Skills and Knowledge (BASK). SHRM. SHRM
Help us improve this guide
How helpful was this article?
One tap helps us understand what’s useful.
Frequently asked questions
Divide separations in the period by employment and multiply by 100. BLS uses employment for the month; many employers use average headcount for the period, the starting plus ending headcount divided by two. Use the convention the question gives.
A compa-ratio of 1.00 means pay is at the range midpoint. What counts as acceptable is set by each employer's pay policy. The University of Wisconsin-Madison, for example, aims for 85% to 115%.
Compa-ratio divides pay by the range midpoint. Position in range measures how far pay sits between the range minimum (0%) and maximum (100%). The same salary gives two different numbers.
Both internal costs, such as recruiter time spent on hiring and recruiting systems, and external costs, such as advertising, agency fees and background checks, divided by the number of hires in the same period. Organizations differ in what they include, so state your method.
In BLS JOLTS data, retirements are reported as other separations, not quits. Many employers count them separately for the same reason.
All of them. HRCI's aPHR, PHR and SPHR outlines name metrics such as cost-per-hire, time-to-fill, turnover and ROI, and SHRM's BASK covers data work under the Analytical Aptitude competency.
Keep practicing for the SHRM-CP.
Review the study tools, access options and price, or start with free practice.
Related Articles
How to Calculate Adverse Impact: The Four-Fifths Rule, Worked Step by Step
Run the four-fifths rule on a hiring decision, a four-group promotion and a test inside a larger process, then try eight practice questions. Every step follows 29 CFR 1607.
SHRM-CP Situational Judgment Questions: How SJI Scoring Actually Works
SHRM-CP situational judgment items are 40% of the exam and reward only the single most effective answer. Here's how SJI scoring works, with examples.
PHR Study Guide: What to Study in Each Functional Area
The PHR tests seven functional areas at application level, and three of them carry 52% of the score. Here is what each area asks of you, what candidates leave thin, and a review order.
